1
Citrus Pre-Dissolve
We apply a natural citrus oil-based pre-wash spray to the lower third of the vehicle body. This helps break down stubborn road film, oily engine residue, and splattered insect stains without touch-friction.
2
Snow Foam Blanketing
A dense layer of heavy-clinging snow foam is blanketed over the whole car. This compound remains on the body for 5 to 7 minutes, encapsulating surface grit and letting it slide down to the floor safely.
3
Pressure Rinse Purge
We rinse the vehicle completely with calibrated water pressure, clearing up to 90% of superficial grit before we touch the panel with a physical microfibre wash mitt.
4
Three-Bucket Wash
We use separate, grit-guarded buckets for wheel areas, wash water, and rinse water. The wash mitt is washed in clean rinse water after every single stroke to prevent dirt recirculating onto your car.
5
Iron Fallout Removal
We spray pH-neutral iron-dissolving liquid across panels to turn embedded metallic particles from motorway brake-dust into a soluble state. The particles bleed purple and wash away safely.
6
Air-Assisted Drying
To eliminate drying towel marks and clear stagnant water from door shuts, wheel nuts and trim panels, we use high-velocity filtered air dryers followed by thick, plush microfibre towels.
